Tungsten Carbide Rod Grades
Chinatungsten Online can manufacture and supply varies sizes as well as tungsten carbide grades. Following is a detailed description of different kind of specification of tungsten carbide rod. We possess the common dimension moulds so we can offer the common Tungsten carbide rod in a short time. What's more, we also supply Tungsten carbide rod according to special requirements.
| Code | Dimension（mm） | ||
| Diameter(D) | Length(L) | Tolerance of Diameter | |
| TCR001 | 1.2 | 330 | +0.30～+0.50 |
| TCR002 | 1.4 | 330 | +0.30～+0.50 |
| TCR003 | 1.6 | 330 | +0.30～+0.50 |
| TCR004 | 1.8 | 330 | +0.30～+0.50 |
| TCR005 | 2.0 | 330 | +0.30～+0.50 |
| TCR006 | 2.2 | 330 | +0.30～+0.50 |
| TCR007 | 2.4 | 330 | +0.30～+0.50 |
| TCR008 | 2.6 | 330 | +0.30～+0.50 |
| TCR009 | 2.8 | 330 | +0.30～+0.50 |
| TCR010 | 3.2 | 330 | +0.30～+0.50 |
| TCR011 | 3.8 | 330 | +0.30～+0.50 |
| TCR012 | 4.2 | 330 | +0.30～+0.50 |
| TCR013 | 4.8 | 330 | +0.30～+0.50 |
| TCR014 | 5.2 | 330 | +0.30～+0.50 |
| TCR015 | 6.2 | 330 | +0.30～+0.50 |
| TCR016 | 7.2 | 330 | +0.30～+0.60 |
| TCR017 | 8.3 | 330 | +0.30～+0.60 |
| TCR018 | 9.3 | 330 | +0.30～+0.60 |
| TCR019 | 10.3 | 330 | +0.30～+0.60 |
| TCR020 | 10.4 | 330 | +0.30～+0.60 |
| TCR021 | 11.4 | 330 | +0.30～+0.60 |
| TCR022 | 12.4 | 330 | +0.30～+0.60 |
| TCR023 | 13.4 | 330 | +0.30～+0.70 |
| TCR024 | 14.4 | 330 | +0.30～+0.70 |
| TCR025 | 16.4 | 330 | +0.30～+0.70 |
| TCR026 | 18.4 | 330 | +0.30～+0.80 |
| TCR027 | 20.5 | 330 | +0.30～+0.80 |
| TCR028 | 22.5 | 330 | +0.30～+0.80 |
| TCR029 | 24.5 | 330 | +0.30～+0.80 |
| TCR030 | 26.5 | 330 | +0.30～+0.80 |
| TCR031 | 28.5 | 330 | +0.30～+0.80 |
| TCR032 | 30.5 | 330 | +0.30～+0.80 |
Related Products:
Tungsten carbide rods include rods with the shapes of round, rectangular and square, solid rods and rods with one or more straight or coolants.
Mechanical seals including tungsten carbide seals and silicon carbide seals are used increasingly on fluid pump to replace packed gland and lip seal.
Tungsten carbide is very suitable for high quality requirement for making tungsten carbide buttons to be used in high and medium pressure DTH drilling.
Tungsten carbide disc cutter is of good wear resistance, small grinding force, low grinding temperature and good quality of processing that are offered with ground or blanks condition.