Tungsten Carbide Rod Dual Straight Holes
Chinatungsten Online can provide quality Tungsten Carbide Rod Dual Straight Holes, the following is our common Carbide Solid Rods blank size models.
Model representation：ΦD×2Φd×TKΦ×LZ（L represents the length，Z represents two straight holes）
| Outer Diameter (mm) | Diameter tolerance (mm) | Hole Size (mm) | Hole tolerance (mm) | Hole spacing (mm) | Hole spacing tolerance (mm) |
Hole deviation (mm) |
| Φ6.3 | 0～+0.3 | 1.0 | ±0.10 | 3.0 | -0.2 | 0.15 |
| Φ8.3 | 1.0 | ±0.15 | 4.0 | -0.3 | 0.15 | |
| Φ10.3 | 1.4 | ±0.15 | 5.0 | -0.3 | 0.20 | |
| Φ12.3 | 0～+0.4 | 1.75 | ±0.15 | 6.0 | -0.5 | 0.30 |
| Φ14.3 | 1.75 | ±0.15 | 7.0 | -0.5 | 0.37 | |
| Φ16.3 | 2.0 | ±0.20 | 8.0 | -0.5 | 0.40 | |
| Φ18.3 | 0～+0.5 | 2.0 | ±0.20 | 9.0 | -0.8 | 0.50 |
| Φ20.4 | 2.5 | ±0.25 | 10.0 | -0.8 | 0.50 |
Related Products:
Tungsten carbide rods include rods with the shapes of round, rectangular and square, solid rods and rods with one or more straight or coolants.
Mechanical seals including tungsten carbide seals and silicon carbide seals are used increasingly on fluid pump to replace packed gland and lip seal.
Tungsten carbide is very suitable for high quality requirement for making tungsten carbide buttons to be used in high and medium pressure DTH drilling.
Tungsten carbide disc cutter is of good wear resistance, small grinding force, low grinding temperature and good quality of processing that are offered with ground or blanks condition.