Tungsten Carbide Rod Single Straight Hole
Chinatungsten Online can provide high-quality Tungsten Carbide Rod Single Straight Hole, the following is our common single straight hole carbide rod size models.
Model representation：ΦD×Φd×L
We can provide blanks which combines different diameters with apertures according to customers' specific requirements.
| Outer Diameter(mm) | Diameter tolerance (mm) | Hole Size | Hole tolerance (mm) | Concentricity | Length (mm) |
Length tolerance |
| Φ2.5 | +0.20～+0.50 | 0.3(mm) | ±0.10 | 0.2 | 330 | 0～+5.0(mm) |
| Φ4.0 | +0.20～+0.50 | 1.0(mm) | ±0.15 | 330 | 0～+5.0(mm) | |
| Φ6.0 | +0.20～+0.50 | 330 | 0～+5.0(mm) | |||
| Φ8.0 | +0.20～+0.50 | 1.5(mm) | 330 | 0～+5.0(mm) | ||
| Φ10.0 | +0.30～+0.60 | 2.0(mm) | ±0.20 | 0.25 | 330 | 0～+5.0(mm) |
| Φ12.0 | +0.30～+0.60 | 330 | 0～+5.0(mm) | |||
| Φ14.0 | +0.30～+0.60 | 330 | 0～+5.0(mm) | |||
| Φ16.0 | +0.30～+0.60 | 330 | 0～+5.0(mm) | |||
| Φ18.0 | +0.40～+0.80 | 3.0 (mm) | ±0.25 | 0.30 | 330 | 0～+5.0(mm) |
| Φ20.0 | +0.40～+0.80 | 330 | 0～+5.0(mm) | |||
| Φ22.0 | +0.40～+0.80 | 330 | 0～+5.0(mm) | |||
| Φ24.0 | +0.40～+0.80 | 4.0 (mm) | ±0.30 | 330 | 0～+5.0(mm) | |
| Φ26.0 | +0.40～+0.80 | 5.0 (mm) | ±0.35 | 330 | 0～+5.0(mm) |
Related Products:
Tungsten carbide rods include rods with the shapes of round, rectangular and square, solid rods and rods with one or more straight or coolants.
Mechanical seals including tungsten carbide seals and silicon carbide seals are used increasingly on fluid pump to replace packed gland and lip seal.
Tungsten carbide is very suitable for high quality requirement for making tungsten carbide buttons to be used in high and medium pressure DTH drilling.
Tungsten carbide disc cutter is of good wear resistance, small grinding force, low grinding temperature and good quality of processing that are offered with ground or blanks condition.